BioLockBag™ Fingerprint Lock Setup Guide

BioLockBag™ Fingerprint Lock Setup Guide

Setting up your biometric lock is simple. Follow these steps to secure your essentials in 0.3 seconds.

---

 

1. Administrator Fingerprint Setup

The first fingerprint registered is the Administrator.

1. Enter Setup Mode: In the unlocked state, press and hold the fingerprint sensor for 3 seconds until the blue light stays on. Release your finger.

2. Collect Fingerprint: Press your finger on the sensor 10+ times from different angles.

3. Completion: The green light will turn on when the fingerprint is successfully recorded.

---

2. Add New User Fingerprint

Authorization from the Administrator is required.

1. Enter Add Mode: Use the Administrator finger to press and hold the sensor for 3 seconds until both blue and red lights flash.

2. Authorize: Press the Administrator finger once to authorize; the blue light will stay on.

3. Collect New Fingerprint: Press the new user's finger on the sensor 10+ times from different angles until the light turns off. The green light indicates success.

---

3. Reset & Delete All Fingerprints

Warning: This action clears all data and restores factory settings (Any finger can unlock).

1. Enter Delete Mode: Use any registered finger to press and hold the sensor for 8-9 seconds.

2. Confirmation: The blue and red lights will flash. Keep holding.

3. Delete: Release when the red light flashes. Press once more to confirm until the blue light stays on.

---

Need Help?

If you experience any issues or need live assistance, our concierge team is always here for you.

📧 Email us at: info@biolockbag.com
🕒 Response time: Within 24 hours

Note: Please ignore the red light during the normal setting process. It is a system indicator that does not affect functionality.